8
For more information go to www.ez-dock.com.
Helpful Hint: To make assembly and disassembly easier, rub
a marina safe lubricant on the coupler rods.
The EZ Kayak Launch mounts to existing or new EZ Dock installations using standard EZ Dock couplers kits
(301100 or 315100). It can be connected to either our low profile 8” dock or to the standard 15” dock via the 6 cou-
pler pockets on each respective side as shown in Figures 3 and 4.
Note:
For detailed coupler installation instructions, please see page 12.
Tools required:
In-Water Installation Tool (900010)
Ratchet and socket set
Composite Coupler Installation Tool (900005)
Screwdrivers (Phillips and standard)
15/16” or 24mm socket
Pry-bar (small and large)
Hammer (rubber mallet)
Figure 3.
NOTE:
1. All empty or unused coupler pockets should be filled with an EZ Dock pocket filler (201030).
2. When side mounting, it is recommended to utilize both front side coupler pockets along with
an additional dock section in front of the EZ Kayak Launch.
1. EZ Kayak Launch Installation Methods (301100, 315100, 100750, & 100750SS)
1A. EZ Dock Coupler Installation (301100)
1
4
2
3
QTY PART NUMBER DESCRIPTION
1
200900
KAYAK LAUNCH
2
20****
DOCK SECTION, STANDARD
3
311010
COUPLER SET, STANDARD
4
9000010
IN-WATER INSTALLATION TOOL
