EZ Digital GP-3010, Руководство по эксплуатации

Страница: 10 / 12

5.DECRIPTION OF PANEL FUNCTION
5-1. Front Panel Description
1. POWER SWITCH : This switch turns on and off the power.
2. C.V LED : Display LED for static state current & voltage operating.
3. CURRENT VR : The current limiting knob for setting and adjusting the output current in a
range of max. 10 ~100%
4. FINE VR : The fine adjustment knob of the output voltage.
5. COARSE VR : The coarse adjustment knob of the output voltage.
6. C.C LED : Display LED for overcurrent.
7. ZERO ADJUST : The mechanical zero adjuster screw for amperemeter.
If the meter needle is off the zero position when the power is off or with no load,
then adjust the screw by a screw driver while the power is off.
8.CURRENT METER : Indicates the load current
9. ZERO ADJUST : The mechanical zero adjuster screw for voltmeter.
If the meter needle is off the zero position adjust the screw while the power is off.
10. VOLTAGE METER : Set an output voltage while reading the voltage indication.
11. OUTPUT TERMINAL (-) : The negative side of output terminal.
12. OUTPUT TERMINAL (+) : The positive side of output terminal.
13. OUTPUT TERMINAL (GND) : When the positive polarity or negative polarity is to be connected to
the ground,either an appropriate output terminal should be connected
to the GND by a short circuit bar supplied as accessory.
When no bar connection is made,the terminal is used as the ground terminal
[7]
0
1
5
4
3
2
0
10
50
40
30 20
CURRENT
VOLTAGE
ON
OFF
POWER
C.C C.V
- GND +
DC POWER SUPPLY GP-505
LIMIT COARSE FINE
8
3
11
10
A
V
4
13
12
7
6
5
2
9
1