Page | 9
6.
CLEANING
6.1
For hygiene and safety, proper cleaning and inspection of the TILT is essential.
6.2
Do NOT use toilet bowl cleaner to clean the TILT or any of its components.
6.3
Carefully remove 120V plug from the wall.
6.4
To access the removable plastic shield, use the push button control to raise the TILT into its “up” position.
6.4.1
Remove the plastic shield by grabbing it from the front and pulling upward then forward until
the shield slides off from the support rollers.
6.5
Clean the TILT components using a soft cloth with warm water and mild soap. Ensure all components are dry
prior to re-assembly and use of the TILT.
7.
BEFORE USE INSPECTION
7.1
Inspect the TILT to make sure all components are working properly. Use the handheld control to cycle the
unit up and down, making sure it’s free from obstructions and working properly. For questions or concerns,
please call 1-800-451-1903 or visit us at www.ezacces.com.
