EZ-ACCESS Passport PL44SP3651, Руководство по установке

Страница: 60 / 68

Page | 60
20.
BATTERIES
20.1. BEFORE YOU BEGIN
Before performing battery services, confirm the keyed power switch is in the ‘ Power Off ’
position and that the emergency stop switch is pushed in.
20.1.1. The VPL comes with two standard batteries, each are 12-volt 12 Ah valve regulated (VRLA)
AGM, sealed lead acid batteries in spill proof housing.
20.1.2. Battery specifications are as follows:
Model : MK ES12-12
Type : AGM
Voltage : 12 V
Capacity : 12 Ah
Length :
5.94” (151 mm)
Width : 3.86” (98 mm)
Height : 3.8” ( 98 mm)
Weight : 7.96 lbs. approx. (3.6 kg)
20.1.3. The information provided below pertains to cross reference batteries. While care has been
taken to ensure the cross-reference information is accurate, battery manufacturers may make
changes to battery descriptions, dimensions, capacities, recommended functions, and usage
requirements. Always check with the battery distributor to determine which battery is best for
your particular installation.

KUNG LONG WP12-12

MK EAST PENN ES12-12

B&B BP12-12

LEOCH DJW12-12HD

EAGLE PICHER CF-12V12

UNIVERSAL UB12120

CSB GP12120

PANASONIC LC-RA1212P

VISION CP12100

POWER PATROL SLA1105CSB

CSB GP12110F2

POWERSONIC PS-12120
20.2. BATTERY REMOVAL
20.2.1. Unplug all electrical wiring from battery terminals (FIG. 20.3).
20.2.2. Remove locknut, washer, and battery mounting bolt (FIG. 20.1). Set aside for reuse.
20.2.3. Remove battery hold down by twisting from side-to-side until the double-back foam tape
breaks free. Scrape excess foam tape from battery hold down.
Double-back foam tape or hook and loop fastener may have been used on the
underside of the battery hold down. If prying is needed to remove battery hold down
from batteries, use caution not to crack battery casings.
If the lower hook and loop fastener portion remains on the power head from a
previous battery replacement, it can stay on the power head; no need to remove it.
However, batteries need to be level. If one piece of foam/hook and loop fastener is
missing, remove them all.