Page | 16
U.S. Patent 7,418,8000
7.
OPERATION
Do not attempt to operate opener until both the motor unit and lever arm and shoe are
securely fastened to the door and jamb. Open and close the door manually a few times to
ensure a fluid motion of the lever arm. This helps to verify the mounting locations of the
motor unit and shoe.
7.1.
Operation
7.1.1.
Plug the CONCIERGE 23DR into 110VAC AC outlet.
7.1.2.
Activate the door opener with a wireless remote transmitter. The door should open smoothly to 90
degrees, pause, and then close. To adjust the open dwell time and/or the close activation time refer to
Adjustments
.
DOOR SHOULD NEVER OPEN BEYOND 90 DEGREES. BEYOND 90 DEGREES THE CLUTCH
ARM AND THE LEVER ARM WILL SCISSOR, CAUSING THE OPENER TO MALFUNCTION.
7.1.3.
Refer to
Troubleshooting
for any issues you are encountering.
7.1.4.
After adjustments, have been made, secure the motor cover over the unit and route the power cord so
it does not obstruct the movement of the door. Power cord exits on the hinge side.
DOOR SHOULD NEVER OPEN BEYOND 90 DEGREES. BEYOND 90 DEGREES THE CLUTCH ARM AND THE
LEVER ARM WILL SCISSOR, CAUSING THE OPENER TO MALFUNCTION.
