Intelligent pulse battery charger AP-17
HOW AND WHEN TO USE THE BURST CHARGING
When charging an over-discharged battery which has a voltage below 6V (at
12V charger), the system does not start charging, even though the charger is
properly connected. In this case, press
START HELP
button to activate forced
charging
with the single-pulse
. If necessary, press the button several times (
up to
100x).
When the 6V voltage is reached
at 12V charger
(For the other chargers, see table
below)
the yellow LED flashes,
then the system automatically starts charging.
Charger model:
AP-17 12V
AP-17 24V
AP-17 36V
AP-17 48V
Start charge at:
6V
12V
18V
24V
TECHNICAL DATA OF THE CHARGER
- type of battery: Pb battery, UNI (Universal), AGM, GEL, CaCaWET
- charge phases: bulk / absorption I / absorption II / equalization / float
- capacity of battery:
min 10Ah (at 12V charger), maximum is not limited
- battery voltage:
12V, 24V, 36V, 48V
- nominal charging current (max):
20A, 10A, 6,5A, 5A intelligent pulse system,
- charging current:
20A (pulse)
- charging mode: pulse charging system 20Hz
- main voltage: 195V – 242VAC
- main voltage frequency: 40 … 60Hz
- max. power: 370 VA
- ambient temperature: from 0 °C to +35 °C
- short contact output:
save, no voltage on output if battery is not connect
- wrong polarity output (main output): fuse 30A (at 12V charger)* -fuse burn
- main input fuse:
T 3,15A (on the main grid side -230V)
- cooling:
fan controlled with thermostat
- dimensions:
170 x 60 x 245
- weight:
1,6 Kg
- IP protect:
IP20
- housing grounding: housing grounded, Class I
- recommended battery capacity: 10...400Ah
- field of use: el. carts, el. wheelchairs, motorcycles, cars, tractors,
quadricycles, workshops, cleaning machines, emergency
vehicles ...
* Charger model:
AP-17 12V
AP-17 24V
AP-17 36V
AP-17 48V
* Front panel fuse:
30A
15A
10A
7,5A
6
