47
Using the PIR Sensor
Step1.
Set the repeat mode to the “
Repeat Default
” option.
Step2.
Insert the memory card to the B1080PX, and the B1080PX will play the default file automatically
while powered on.
Step3.
After sensing approaching subjects, the B1080PX will play all the demo files once.
11.6 USB AUTO-COPY FUNCTION
Step1:
Use the “Notepad” to create a file on your PC, and named the file
“AUTOCOPY.ini”.
Step2:
Put the files that you want to copy and the file “
AUTOCOPY.ini
” to the USB flash driver.
Step3:
Insert the USB flash driver to the B1080PX, and it will automatically copy the files from USB
flash driver to CF card.
AUTOCOPY.ini
48
12. TROUBLESHOOTING
Situation
Check Point
No picture
1.
Check power cable and power switches.
2.
Ensure the video cables are connected between the player and
the B1080PX.
3.
Press the “TV MODE” button on the remote control to select the
correct output mode.
4.
Make sure the file format on the CF card is correct.
5.
Check if the display device is switched to correct video input
source.
No response from
the remote control
1.
Check that the batteries (2 batteries (AAA size) for the remote
control is installed correctly.
2.
Check that there are no obstacles between the remote control and
the remote control sensor window.
No sound
1.
Check if the mute function is on.
2.
Check if the volume is set properly.
3.
Check if audio cable has been connected correctly.
No responding while
pressing the wireless
touch – sensor buttons
1.
Confirm the polarity of the battery.
2.
Check that there are no obstacles between the touch-sensor
buttons and the sensor window.
Network not working
1.
Check your IP settings on the Network Setup page. (refer to 7.1)
2.
If using wired network, make sure the network cable is plugged in
on both the B1080PX and your network hub.