EYEZONE B1080P-4, Руководство пользователя

Страница: 23 / 23

45
11.4.2 Demo Files
Ex. Using the wireless 5 Touch-Sensor Buttons
„ Put 6 demo files on CF card. (1 default file and 5 demo files)
NOTE:
The files are sorted by filename in ascending order alphanumerically (numbers < upper case
letters < lowercase letter). Each button is mapped to a file by this order.
For Example ：
There are 6 demo files on the CF card. The file names are
a01.xxx
,
33.xxx
,
b55.xxx
,
1abc.xxx
,
07.xxx
and
A01.xxx
. ( xxx is extension of the file )
Default File
：
07.xxx Demo File 1
：
1abc.xxx Demo File 2
：
33.xxx
Demo File 3
：
A01.xxx Demo File 4
：
a01.xxx Demo File 5
：
b55.xxx
11.4.3 Connect to the Touch-Sensor Buttons
„ Open the battery cover and set the batteries (AA size) as shown below. Please note that the
polarity of the battery.
11.4.4 Play the Demo Files
Step 1:
Insert the CF card to the Eyezone B1080P-4, and the Eyezone B1080P-4 will play the default
file automatically while powered on.
Step 2:
Press one of the touch-sensor buttons 1-5 to play the corresponding demo file.
Step 3:
The Eyezone B1080P-4 supports two options (Repeat Default / Repeat All) when the demo file
finishes playing. The functions can be set in the setup menu. (Other Setup → Play Button)
- Repeat Default:
Eyezone B1080P-4 will automatically play the default file when the demo
file finishes playing.
- Repeat All:
Eyezone B1080P-4 will automatically play all the demo files when the demo file finishes
playing.
NOTE:
If you are in
Video In Display
mode, the B1080P-4 will automatically play the live video from
video source when the demo file finishes playing.
46
12. TROUBLESHOOTING
Situation Check Point
No Picture
1. Check power cable and power switches.
2. Ensure the video cables are connected between the player and
the Eyezone B1080P-4.
3. Press the “TV MODE” button on the remote control to select the
correct output mode.
4. Make sure the file format on the CF card is correct.
5. Check if the display device is switched to correct video input
source.
No Response From
the Remote Control
1. Ensure that there are 2 batteries (AAA size) in the remote control
and they are inserted the correctly.
2. Check for any barrier between the remote control and the product.
No sound
1. Check if the mute function is on.
2. Check if the volume is set properly.
3. Check if audio cable has been connected correctly.
No Responding while
pressing the wireless
touch – sensor buttons
1. Confirm the polarity of the battery.
Network Not Working
1. Check your IP settings on the Network Setup page. (refer to 7.1)
2. If using wired network, make sure the network cable is plugged in
on both the Eyezone B1080P-4 and your network hub.