Eyevis EYE-LCD7000, Руководство пользователя, Страница: 14 / 63

EYE-LCD7000 / 8200 14
3.3 The Remote Control
3.3.1 Remote Control Buttons / Push-Buttons on Device
Key Function
Power Power on/off board
Menu Opens OSD
Exit Closes OSD
▲
“Up” • Moves up through possible selections
• Switch main input port while OSD is closed
▼
“Down” • Moves down through possible selections
• Switch pip input port while OSD is closed
◄
“Left” • Exits current sub-menu / function (goes to upper menu)
• Moves left through possible selections or slider
• Decrease brightness while OSD is closed
►
“Right” • Enters current sub-menu / function
• Moves right through possible selections or slider,
• Increase brightness while OSD is closed
OK Enters chosen function
Source M Switches between main sources
Source P Switches between PIP sources
Volume up Increases volume
Volume down Deceases volume
Brightness up Increases brightness while OSD is closed
Brightness down Decreases brightness while OSD is closed
PIP Select Switches between PIP on and off
PIP Size Switches PIP size(small, large)
PIP Position Switches between 4 PIP position (right-top, left-top, left-
bottom, right-bottom)
PIP Swap Swaps input of main and PIP, when PIP is open
Auto Auto-configuration for VGA input
Freeze Freeze image
0 ADC-calibration for test purposes
Mute Mute Audio
Aspect Main Changes aspect ratio of main input
Aspect PIP Changes aspect ratio of PIP input
PAP Main: Fullscreen; Left side (orig. aspect ratio); Left Side
(stretched ratio)