Safety intructions
)
The TFT colour LCD panel used in this monitor is made with the application of
high precision technology. However, there may be minute points on the
screen where pixels never light or are permanently lit. Also, if the screen is
viewed from an acute angle there may be uneven colours or brightness.
)
Please note that these are not malfunctions but common phenomena of LCDs
and will not affect the performance of the monitor.
)
Do not display a still picture for a long period, as this could cause a residual
image.
)
Never rub or tap the monitor with hard objects.
)
Please understand that eyevis bears no responsibility for errors made during
use by the customer or a third party, nor for any other malfunctions or
damage to this product arising during use, except where indemnity liability is
recognized under law.
)
This monitor and its accessories may be upgraded without advance notice.
)
Do not use the monitor where there is a lot of dust, where humidity is high,
or where the monitor may come into contact with oil or steam, as this could
lead to fire.
)
Ensure that the monitor does not come into contact with water or other
liquids. Ensure that no objects such as paper clips or pins enter the monitor
as this could lead to fire or electric shock.
)
Do not place the monitor on top of unstable objects or in unsafe places. Do
not allow the monitor to receive strong shocks or to strongly vibrate. Causing
the monitor to fall or topple over may damage it.
)
Do not use the monitor near heating equipment or in places where there is
likelihood of high temperature, as this may lead to generation of excessive
heat and outbreak of fire.
)
Do not use the monitor in places where it may be exposed to direct sunlight.
)
Please be sure to constantly remove dust and garbage that has attached to
the ventilation opening. If dust collects in the ventilation opening, it may
lead to excessive heat, outbreak of fire, or malfunction. As a standard, clean
the inside of the monitor once every year. If dust collects inside the monitor,
it may lead to excessive heat, outbreak of fire, or malfunction. Please request
a cleaning of the inside of the monitor from an authorized Eyevis servicing
dealer or service centre.
)
Images cannot be rotated on this monitor.
)
When using in vertical orientation, you will need to prepare appropriately
orientated content in advance.
)
Please make sure that the socket-outlet is installed near the System and is
easily accessible. The Power supply cord serves as a disconnect device.
EYE-LCD-8400-QHD-V2
8
User Manual
