Quick Operation Guide of SD-0400HL, SD-0802HL, SD-1602HL Series DVR
11
5.
Click
Next
button which takes you back to the Network Setup Wizard window.
Set the network parameters, including the NIC type, IPv4 address, IPv4 subnet mask, default gateway, etc.
You can enable the DHCP to automatically obtain an IP address and other network settings from that server.
Note:
The SD Series models provide one 10M/100M/1000Mbps self-adaptive network interface.
6.
Click
Next
button to enter the
HDD Management
window.
To initialize the HDD, click the
Init
button. Initialization removes all the data saved in the HDD.
7.
Click
Next
button to enter the
Record Settings
window.
1)
Select the camera to configure.
2)
Check the checkbox to enable
Start Recording
.
