E Y E N E T
ON BOARD WIFI
EYERIDE
ON BOARD WIFI
EYERIDE
EY
EN
ET
ON BOARD WIFI
EYERIDE
D. POWER ON THE EYENET ROUTER
1. Plugging in the included “power pigtail” connector. The red wire must be connected to 12 Volt DC Power.
Connecting to ignition is recommended. The black wire must be connected to ground.
2. Once you have power on the Eyenet, Power light will turn red and Internet light will started to blink.
3. When the Power light is off and WiFi light is on, your Eyenet is ready to use.
12Volt DC Power
Ground
1
2
3
F. CONNECTING TO INTERNET
Once powered up, connect to the WiFi SSID provided to your by your
EyeRide Technician. There will be no password by default, although you
must click the Accept Terms and Conditions on the splash page which
will come up automatically.
www.
EyeRideOnline
.com
EYERIDE
E. CONNECTING THE EYENET TO EYERIDE
1. Run 12Volts power to the first slot of Out1.
2. Connect the red wire from the EyeNet’s power pigtail to the second
slot of “Out1.” This will ensure the EyeNet and the Eye Ride are on the
same power schedule.
3. Connect the Ethernet Cable from the one of the internal yellow ports
on the back of the EyeNet to the “Ethernet” port on the top right of the
EyeRide.
EY
EN
ET
ON BOARD WIFI
EYERIDE
EyeRide
EyeNet
