Eyemax PT-9630 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 49

Eyemax PT-9630 Скачать руководство пользователя страница 3

ANTI-VANDAL 30x, 36x, 37x SPEED DOME
CAMERA

3/46

Important Safeguard

1.

Read Instructions

Read all of the safety and operating instructions before using the product.

2.

Retain Instructions

Save these instructions for future reference.

3.

Attachments / Accessories

Do not use attachments or accessories unless recommended by the appliance manufacturer as
they may cause hazards, damage product and void warranty.

4.

Water and Moisture

Do not use this product near water or moisture.

5.

Installation

Do not place or mount this product in or on an unstable or improperly supported location.
Improperly installed product may fall, causing serious injury to a child or adult, and damage to
the product. Use only with a mounting device recommended by the manufacturer, or sold with
the product. To insure proper mounting, follow the manufacturer's instructions and use only
mounting accessories recommended by manufacturer.

6.

Power source

This product should be operated only from the type of power source indicated on the marking
label.

Precautions

Operating

z

Before using, make sure power supply and others are properly connected.

z

While operating, if any abnormal condition or malfunction is observed, stop using the
camera immediately and then contact your Special dealer.

Handling

z

Do not disassemble or tamper with parts inside the camera.

z

Do not drop or subject the camera to shock and vibration as this can damage camera.

z

Care must be taken when you clean the clear dome cover. Especially, scratch and dust will
ruin your quality of camera.

Installation and Storage

z

Do not install the camera in areas of extreme temperature, which exceed the allowable
range.

z

Avoid installing in humid or dusty places.

z

Avoid installing in places where radiation is present.

z

Avoid installing in places where there are strong magnetic fields and electric signals.

z

Avoid installing in places where the camera would be subject to strong vibrations.

z

Never expose the camera to rain and water.

NOTE:

If the camera is installed or rebooted after power failure when ambient temperature is

below the freezing point, the dome cover is frosted. In this case, the frost will be disappeared

NOTICE

«
1
2
3
4
5
...
»

Содержание PT-9630


















































Отзывы:

Нет отзывов