Eyelights EyeRide, Руководство пользователя

Страница: 11 / 15

Step two : Mounting the external module
Caution, the external module and the prism are connected by a ribbon cable, which passes the
video signal between the two modules, this cable is very fragile, do not pull on it, it could damage
your product.
The external module, like the prism, will be placed on the right side of the helmet.
Remove the protective film from the 3M adhesive, then place the module where you want it and
apply pressure for about 2 minutes.
Step three : audio kit installation
Install the flat speakers of the audio kit in the dedicated spots. The earphone connected to the
microphone, which has the shortest cable, is positioned on the right side of the helmet. To
properly position the directional microphone, the small white arrow-shaped mark must face your
mouth and therefore the inside of your helmet.
Prism adjustment
If it is not already done, turn on the product and connect it to display the Apple CarPlay or
Android Auto menu into the prism.
You can find the position of your prism by using the two main settings as below to view the menu
in the way that suits you best.
The internal module has a double adjustment system, consisting of a slider to allow it to slide
horizontally, and a double ball-and-socket joint rod to adjust the angle and depth. This allows you
to easily find the layout that best suits you.