5-2 Operating procedures
Stop operating the unit if you notice
any abnormal conditions.
If you notice any abnormal condition, immediately
turn the power switch OFF and refer to the section
“Causes of troubles and countermeasures”.
Caution
Never touch the sample flask or the
bath during condensation.
The bath and the specimen flask will be hot during
condensation and there is a danger of burning.
Caution
- 16 –
Caution
Never spill sample on the unit.
If any sample is spilt on the body or on the water
bath, immediately wipe it out.
Some types of sample may be ignited with heat of
the body or the water bath.
Warning
Jack up/down key
Continuous
sample feeding
port
Capillary feed tube
Water bath
（
SB-1300 type
）
Sample flask
Condenser
（
S-type
）
Rotation control knob
Power switch
Continuous
sample
feeding port
Capillary
feed tube
Continuous
sample
feeding port
Capillary
feed tube
Condenser
（
V-type
）
Condenser
（
T-type
）
Receiver flask
Take care for conditions and
handling of glass parts
Broken or flowed glass parts may result in accidents.
Inspect for damages or flows on glass parts and take
care when handling them.
