Page 10
eyeheight
Unit 34 Park House Watford Business Park Greenhill Crescent Watford Herts GB WD18 8PH
Reg. No. 2855535 Telephone: +44 (0) 1923 256 000 Fax: +44 (0) 1923 256 100 email: [email protected]
Control of the PM-2E/PM-4 is generally done using an FP-9 Flexi panel. It is
also possible to control this unit with an FP-10 Panel (Desktop Panel) or if the
unit is mounted in a Mini-Box limited control will be available with the mini-box
Preset select buttons which will have been pre-set at the factory. The unit can
also be controlled remotely using a PC running the Softpanel software.
The PM-2E/PM-4 is, as are all genetics modules, controlled using a set of
MENUS. Each of these menus contains up to 3 parameters that are adjusted
using the rotary digipots. The Menus define all of the adjustable operational
parameters in the PM-2E/PM-4. Pressing the rotary digipots brings the
parameter to its default value. Device selection is done using the device
select switches which, when pressed, will offer the name of the device in the
LCD Window. Modules can be acquired and then de-acquired using the set-
up switch. For a full description of the operation philosophy of the GeNETics
system refer to the “geNETics User Guide” (section “Operation of the
Flexipanel”)
A full list of the Menus and their functions are given in section 3 of this
chapter.
The following set of menus defines the operation of the PM-2E/PM-4. Some of
the menus below only apply for the PM-2E/PM-4 and PM-2E/PM-4E units.
This is indicated
Operation
3
Section 1
Control of the PM-2E/PM-4
Section 2
Operational Menus for the PM-2E/PM-4
Menus 00-03
Top Level Menus
------
AUDIO
------
------
DSPLAY
------
------
METER
------
------
SYSTEM
------
