Eyecar M1, Руководство пользователя

Страница: 15 / 25

1. Firmware Update
- Store bsac.bin , mcode.bin (New version) at the top-level directory of SD CARD.
After inserting SD CARD and turn on the product, RED LED will be light.
And then, product will reboot after voice guiding “Update mode”and putting out LED light.
2. PC player Update
- Store new version of player (player.exe, config.sys) at the top-level directory of SD CARD. Insert SD CARD
into the product, turn on the product by pressing (+) Button. Update will be proceeded with voice guiding
“update mode” and RED LED light.After finishing Update, product will be reboot with putting out LED light.
Function of each part
15
│Update Instructions│
1. Voice recording ON : In the condition of Voice recording OFF, Press (+) Button for more than 3 seconds,
Voice recording start with voice guiding after beep sound twice
2. Voice recording OFF : In the condition of Voice recording ON, Press (+) Button for more than 3 seconds,
Voice recording stop with voice guiding after beep sound twice.
│Voice Recording Setting│- Default setting is Voice recording OFF mode
If user press EMR buttion for 1 second, the 2 minutes data which is storing will be transfered & stored to the
EVENT folder automatically
│Manual Event Recoding│
- Do not remove the power cable and do not turn the engine Off. Power Off during the update process may cause fatal error.