background image

 

 

 

TROUBLESHOOTING         

 
 
 
 
 
 

 

CORRECT DISPOSAL OF THIS PRODUCT 

This marking indicates that this product should not be disposed with other household wastes. To 
prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle 
it responsibly to promote the sustainable reuse of material resources. To return your used device, 
please use the return and collection systems or contact the retailer where the product was purchased. 
They can take this product for environmentally safe recycling.  

This appliance is a dry pick-up, Canister type vacuum cleaner for household and indoor use. Also, it is 
a general-purpose vacuum cleaner, which can be used for hard floor cleaning. 

 

Problem

 

Possible cause

 

Possible Solution

 

EyeVac Pro  
will not turn on/no power 
 

 

 

1. Not firmly plugged in  
2. Unit is in OFF position 
3. Pre-Motor is not in 
position  
4. Broken switch  
 

1. Plug in firmly  
2. Turn control dial to MAN or AUTO position  
3. Ensure that Pre-Motor Filter is locked and flush 
with Canister Lid 
4. Remove Canister to check switch inside cavity 
above where Pre-Motor Filter is positioned. If 
switch is broken or missing, fill out a :service 
Request Form

 at 

EyeVac.com/connect 

Does not pick up debris 

1. Dirt inlet is blocked  
2. Container is full  
3. Debris may be too large 
for inlet 

1.  Turn control dial to OFF position  
2. Clean path of dirt inlet  
3. Empty Canister  
4. Clear large debris 
 

EyeVac Pro sensors do not 
activate 
 

1. Unit is not in AUTO mode 

1.  Turn control dial to AUTO position 

Suction is not strong 

1. Filters may be dirty 

1.   Turn control dial to the OFF position  
2.  Clean Pre-Motor or Exhaust filter when needed 
 

Status indicator light 
blinking 

1. EyeVac Pro sensors have 
been shut off for 30 
seconds which caused 
power to the motor to be 
shut off 
 

1.  Turn control dial to the OFF position 

Canister Indicator Light is 
ON 
 

1. Canister is full 

1.  Turn control dial to the OFF position  
2. Empty the Canister 
3. Clean all filters 

Debris at inlet before unit is 
powered on 

 

1.  Turn control dial to the MANUAL position 
2. Activate unit manually 

Содержание EVP










Отзывы: