www.eyc-tech.com
5
Clamp-on Ultrasonic Flow
Flow
Setup Menu-Pipe parameter
Press
, Select 0. Pipe parameter, then
display：
The following options are available ( by
or
buttons)
0.
Outer diameter
1.
Wall thickness
2.
Material：Move
or
can option PVC, Carbon steel, Steel, Copper pipe.
3.
Fluid type：Move
or
can option Water, Sea Water, Oil ... etc.
Setup Menu-System setting
Press
, Select 1. System setting, then
display：
The following options are available (by
or
buttons)
0.
System unit：Move
or
can option Metric, English.
1.
Flow rate unit：Move
or
can option m
3
/h, LPM, GPM.
2.
Total unit：Move
or
can option m
3
, L, GAL.
3.
Totalize RESET：All parameters are reset, press
, move
or
arrow to select
“YES”
or
“NO”
. After
“YES”
is selected.
4.
Time set
Generally, it is unnecessary to modify date time as the system is provided
with a highly reliable perpetual calendar chip.
5.
System lock
Once the system is locked, any modifications to the system are prohibited, but the
parameter is readable.
”
Unlock
”
using your designated password. The password is
composed of 1 … 4 numbers.
6.
System INFO
System INFO：Display serial number (SN) of the meter. This SN is the only one
assigned to each flow meter ready to leave the factory. The factory uses it for files
setup and for management by the user.
Set zero：Press
; reset
“
ZERO Point
”
which was set by the user.
Manual totalizer：The manual totalize is a separate totalize.
Press
to start, and press
to stop it. It is used for flow measurement and
calculation.
Setup Menu-Calibration
Press
, Select 2. Calibration, and then
display：