EXXOTEST DTM7000, Руководство пользователя

Страница: 3 / 29

Lighting & Signalling modules
3
Site: exxotest.com
1. INSTALLATION GUIDE
Installing and setting-up all DTM7000 modules
Connect to a 12 to 14 V power supply (not provided), paying careful attention to polarities.
Then interconnect the various modules in accordance with the operating manual supplied with all
DTM7000 modules.
Then energised, moving parts remain in their current position.
Operational environment
All DTM7000 modules should be installed in a clean, dry location, free of dust, water vapour and
combustion fumes.
The equipment requires a lighting level of approximately 400 to 500 Lux.
The equipment can be installed in a Practical Workshop Classroom, the noise generated will not exceed
70 dBA.
Modules are protected from potential user errors.
Calibration & maintenance of all DTM7000 modules
Calibration: Factory Settings.
Servicing interval: N/A
Cleaning: Use a soft, clean cloth with a window cleaning product.
Number of stations, user position
All DTM7000 modules can be taken as one single workstation.
The various modules are placed on a worktop, and users will remain seated throughout their practical
lesson.
Method for removal from service
Turn off power supply, unplug all connecting wires. Check for current by pressing the buttons on each
module, if nothing happens, no current is present.
Then store the DTM7030 modules in a contained room with a panel marked "Equipment Removed from
Service".
Residual hazards
After extended use of the bulb unit there is a risk of burns.