Exuav FlyTower F3, Инструкция по эксплуатации

Страница: 2 / 14

www.exuavrc.com
Product specifications
4 in 1 ESC
PDB Integrated
Battery Monitoring Integrated
FC Power Integrated
Operating Voltage 2-4S Lipo
Maximum continuous operating current 4*30A
Maximum instantaneous operating current 4*35A(10S)
Oneshot 125/42/Dshot 150/300/600 YES
BlheliSuite Configurable YES
Firmware Vision BLHeli S/Dshot 150/300/600 16.5 (L_H_00)
Board Size 36*36mm
weight 10g
FC&VTX Board
Firmware Vision Betaflight 3.1(OMNIBUS)
Configure BetaFlight
VTX Power 25/200/400mW(MAX 800mW)
CH 40CH
OSD Firmware Betaflight OSD
Video Camera Voltage Any stand by 5V Video Camera
Board Size 36*36mm
weight 11.4g
FlyTower F3
Any Board weight 21.4g
total weight 28.7g
Installation height(Add air-cooling fin) 15mm/20mm
Screws M3*18mm
Recommended Rack Plate Thickness Not more than 3MM （ 3mm above the appropriate
extension of the screw）
The FlyTower F3 board was designed basing on OMNIBUS (Betaflight) FC and highly
integrated with OSD,BEC,4 in 1 BLHeli_S 30A/DShot 30A ESC and VTX(25/200/400mW).It gives
you all the features what you need in FPV, which makes you easily get into FPV Racing.
★
Practical - Easy to access connectors
★
Configurable - Choose to use connectors
★
Stackable - Mount our 4 in 1 ESC
★
Compact - Only 36x36x15mm.(Add air-cooling fin MAX 36*36*20MM)
★
Weight - 28.7 grams and 2 stack boards
★
Professional - Symmetrical, Neat and Tidy and Easy to install in any racing drone
★
36x36mm board with 30.5mm mounting holes
★
STM32 F303 MCU, Runs Betaflight firmware(supported from v3.0)
★
SD card slot
★
Use MPU6000 as Acc & gyro over SPI Bus
★
STM32 controls OSD chip over SPI in DMA mode, less CPU using, faster rate
★
Micro USB socket