3
D
Audio LED indicators
•
HBR LED
— Lights when the embedded audio signal is high bit rate audio.
•
HDMI LED
— Lights when HDMI embedded audio output (HBR, bitstream, or LPCM) is enabled.
•
Bitstream LED
— Lights when the input audio signal is Dolby® Digital, DTS®, or 2-channel Dolby.
•
LPCM LED
— Lights when the embedded audio input signal is 2-channel LPCM.
•
S/PDIF LED
— Lights when S/PDIF audio output (multi-channel or LPCM) is enabled.
•
Analog LED
— Lights when analog audio output is enabled.
E
Menu button
— Press this button to access and navigate the on-screen display (OSD) menu system
F
Enter button
— Press this button to select submenus and submenu items.
G
Adjustment knobs
— Rotate the horizontal (
[
) and vertical (
{
) knobs to navigate the OSD menu and to adjust settings.
Front Panel Lockout Mode (Executive Mode)
The front panel lockout mode limits operation of the device from the front panel. When enabled, use SIS commands or the XTP
System Configuration Software to configure the device. To enable or disable the front panel lockout mode through the front panel,
press and hold the
Menu
(
E
) and
Enter
(
F
) buttons simultaneously for 2 seconds or until the power LED blinks.
HDMI Audio
Move and hold (for about 1 second) the HDMI audio switch up (see
figure 1
,
E
on page 1) to enable embedded audio on the
display connected to the HDMI output connector or move and hold (for about 1 second) the HDMI audio switch down to disable
it. The switch returns to the middle position after it has been released. The associated LED lights when the audio is enabled and
remains unlit when audio is disabled.
Configuration and Control
To configure the XTP SR HD 4K, use the front panel controls and the on-screen display (OSD) menu, Simple instruction Set (SIS)
commands, or the XTP System Configuration Software.
On-screen display menu system
The OSD menu consists of six submenus that can be accessed using the front panel
Menu
button. View the menu on a display
connected to the HDMI output connector (see
figure 1
,
E
). The submenus are:
•
Image Reset
— Use this submenu to center and size the image to fill the output screen.
•
Picture Control
— Use this submenu to adjust the horizontal and vertical position, horizontal and vertical size, brightness,
contrast, and detail of the image.
•
User Presets
— Use this submenu to save or recall a user preset.
•
Input Configuration
— Use this submenu to view the total pixels and horizontal and vertical active pixels of the input signal.
•
Output Configuration
— Use this submenu to select an output rate from a list of common resolutions and refresh rates or
view color space, color bit depth, and HDMI data settings (by default, all three are set to
Auto
).
•
Advanced Configuration
— Use this submenu to apply a test pattern, enable or disable a blank screen, freeze the output,
set the aspect ratio, or reset the receiver to factory default settings.
To adjust settings:
1.
Press the
Menu
button to access the main menu.
2.
Rotate either adjustment knob to navigate to a desired submenu.
3.
Press the
Enter
button to access submenu items of a selected submenu.
4.
Rotate either adjustment knob to navigate a desired submenu item.
5.
Press the
Enter
button to select a submenu item for adjustment.
6.
As required, rotate the adjustment knobs or press the
Enter
button to adjust submenu items.
7.
Press the
Menu
button to return to the list of submenus or exit the OSD menu.
XTP System Configuration Software
The XTP SR HD 4K can be configured by the XTP System Configuration Software when it is installed on a connected host device,
such as a PC, through the front panel USB port (see the
XTP SR HD 4K User Guide
for more details).