manualshive.com logo in svg

Extron electronics XMP 240 C AT, Руководство пользователя, Страница: 22 / 139

Поделиться
Скачать
Extron electronics XMP 240 C AT Скачать руководство пользователя страница 22

XMP 240 C AT • DSP Configurator Software

16

Macros Drop-Down

The 

Run Macro

 drop-down menu is available when connected to the XMP 240 C AT in Live 

mode. The drop-down list is unavailable in Emulate mode.
The 

Run Macro

 drop-down list allows the user to view and run all macros that have been 

pushed to the device. The list of macros updates dynamically when a new macro is created. 
Macros created in DSP Configurator that have not been pushed to the device appear in the 
list with an asterisk to the right of the macro name. Only macros that have been pushed 
to the device can be run from the 

Run Macro

 drop-down list (

Macros

 on page 72 for 

information on configuring macros).

Figure 14. 

Macros Drop-Down Menu

Presets Drop-Down

The 

Presets

 drop-down menu allows the user to view and apply presets saved in the 

current configuration file or on a device connected in Live mode. Presets with an asterisk 
next to them are on the XMP 240 C AT, but not in the current configuration file. Run a preset 
to load it into the configuration file. Alternatively, perform a backup to run all presets and 
load them into the current configuration file (

File

 on page 12).

Figure 15. 

Presets Drop-Down Menu

After selecting a preset from the list, choose one of the following actions from the 
DSP Configurator status panel:

Recall

 — Recalls the selected preset and applies settings to the main workspace.

Cancel

 — Cancels the preset recall and returns to the main workspace with the current 

emulation or state intact.

Delete

 — Deletes the selected preset from the configuration.

Figure 16. 

Preset and Action Selection

DSP Configurator Status Panel

This panel displays the current status of DSP Configurator and shows when data is being 
pushed to or pulled from the device. When the software is ready to perform actions, the 
panel reads 

Ready

.

Figure 17. 

DSP Configurator Status Panel

figure 9.  

Macros Drop-down Menu

figure 10.   Presets Drop Down Menu

figure 11.   Preset and Action Selection

figure 12.   DSP Configurator Status Panel

Содержание XMP 240 C AT












































































































































Отзывы:

Нет отзывов