Extron electronics VN-Matrix 250 Series, Руководство пользователя

Страница: 44 / 140

Tabs Shared by Both the Encoder and Decoder
Some of the tabs listed in this section, for example the Device List (see below), Accounts
(see page 37), Alarms (see page 38), and Alarm Logs tabs (see page 39), can be
accessed without first selecting a device.
Other tabs, for example the
License (see page 45), Upgrade (see page 41), and
Peripherals (see page 42) tabs, can only be selected once a device has been selected.
However, the options in these tabs are identical whether you navigate to the page from an
encoder or a decoder. Therefore, they have also been included in this Shared Tabs section.
Save All
,
Help
, and
Logout
are available in all screens, although these function as buttons
rather than tabs.
Save All
saves changes you have made:
On the
Device List
page,
Save All
saves all changes on the system.
On the
Device
page,
Save All
saves only the changes to that device.
Help
provides a context-sensitive help page that explains the features of the tab that is
currently open.
Logout
logs you out of the system.
Device List tab
The control interface opens to the
Device List
tab.
Figure 20. VN-Matrix Device List Tab.
When the
Device List
tab is selected, the Accounts and Alarms tabs become available.
The
Device List
lists all the devices in the system, using the following icons:
Mode Icon Description Status Icon Description
Unknown device Alarm status gray — a device that has not
contacted the controller during this session.
Encoder device
(source) Alarm status green — a device under active
control with no alarms.
Decoder device
(display) Alarm status yellow — a device under active
control showing only warning alarms.
Alarm status red — a device under active
control showing critical alarms.
VNM 250 • VNM 250 GUI Overview 36