Mounting the USB Extender
ATTENTION:
•
Installation and service must be performed by authorized personnel only.
•
L’installation et l’entretien doivent être effectués par le personnel autorisé
uniquement.
The three inch deep, one inch high, quarter-rack width USB Extender transmitters and
receivers can be placed on a tabletop, mounted on a rack shelf, or mounted under a desk
or tabletop. The receiver can be mounted on a projector bracket. Consult the individual
mounting kits for installation instructions.
Tabletop Placement
Affix the four included rubber feet to the bottom of the unit and place it in any convenient
location.
Rack Mounting
UL Guidelines for Rack Mounting
The following Underwriters Laboratories (UL) guidelines are relevant to the safe installation of
these products in a rack:
1.
Elevated operating ambient temperature
—
If the unit is installed in a closed or
multi-unit rack assembly, the operating ambient temperature of the rack environment
may be greater than room ambient temperature. Therefore, install the equipment in
an environment compatible with the maximum ambient temperature (Tma: +122 °F,
+50 °C) specified by Extron.
2.
Reduced air flow
— Install the equipment in the rack so that the equipment gets
adequate air flow for safe operation.
3.
Mechanical loading
— Mount the equipment in the rack so that uneven mechanical
loading does not create a hazardous condition.
4.
Circuit overloading
— Connect the equipment to the supply circuit and consider the
effect that circuit overloading might have on overcurrent protection and supply wiring.
Consider the equipment nameplate ratings when addressing this concern.
5.
Reliable earthing (grounding)
— Maintain reliable grounding of rack-mounted
equipment. Pay particular attention to supply connections other than direct
connections to the branch circuit (such as the use of power strips).
Rack Mounting Procedure
The USB Extenders are in three inch deep, quarter rack width, one inch high metal
enclosures. To find an appropriate rack mount system for your installation, go to the product
page at
To mount the USB Extender, follow the instructions provided with the accessories.
Under-furniture Mounting
The unit can be mounted under a horizontal surface using an optional Under-Desk Mount
Kit for eighth-rack and quarter-rack width products (see
). To mount the
USB Extenders follow the instructions provided with the mounting kit.
USB Extenders • Reference Information
14
Содержание USB Extender AAP Rx
Страница 7: ...USB Extenders Contents vi...