Extron electronics TouchLink TLP 350CV, Руководство пользователя

Страница: 27 / 54

On-screen Menus
This section describes:
•
Setup Menu
• Calibration Screen
Setup Menu
The on-screen setup menus allow basic configuration of the TLP 350CV. To open the menus,
press the
Menu button on the front panel (see figure 12 , E , on page 17). The menu opens on
the touchscreen. The first screen to be displayed is the
Main
screen. From this screen, you can
select any of the other screens by pressing the appropriate button. There are five screens:
• Main
•
Volume (Vol)
•
Time
•
IP
•
Video (Vid)
Main
Main
Vol
Time
IP Exit
Down Up
Down
On On
Up
Sleep timer: 005 Min
Backlight: 073%
Auto
Backlight
Vid
LED
Backlight
Figure 13. Main Menu Screen
The
Main
menu is the first to be displayed when the setup menus open. It provides access to
the other screens by pressing the
Vol
(Volume),
Time
,
IP
, and
Vid
(Video) buttons.
From this screen you can also configure the Sleep Timer (see below), Screen Backlight (see
page 20), Auto Backlight , and LED Backlight .
Sleep Timer
The sleep timer determines how long the panel is inactive before it enters sleep mode. In sleep
mode, the screen backlight is switched off and the touchscreen goes dark to save power. Use
the
Down
and
Up
buttons to set a value between
0
and
50,000
seconds. The current setting is
shown just above the buttons.
Touching the screen or side buttons overrides Sleep mode. The screen backlight is switched on
and the screen shows what was displayed when the sleep timer was activated. When the sleep
mode is overridden, the first press is ignored to avoid inadvertent button operation. Subsequent
presses engage button functions.
TLP 350CV and TLE 350 • On-screen Menus 19