Extron electronics TLI Pro 201, Руководство пользователя

Страница: 24 / 46

Input
Touchpanel Setup
EXIT
STATUS
NETWORK
OUTPUT
INPUT
AUDIO
PROJECT INFORMATION
ADVANCED
Input
Connected Display
HDMI
LPCM 2Ch
EXN
3840x2160 at 30Hz
Output Config
HDMI
LPCM 2Ch
EXN
1080p at 30Hz
Input Status
HDMI
LPCM 2Ch
HDCP
1080p at 60Hz
HDMI
LPCM 2Ch
1080p at 30Hz
Signal
EDID
Input Configuration
FOLLOW FILL Aspect Ratio
HDCP Authorize
EDID Minder
Video Preview
Touchpanel Setup
EXIT
STATUS
NETWORK
OUTPUT
INPUT
AUDIO
PROJECT INFORMATION
ADVANCED
Input
Figure 13.
Input Screen
At the top of the screen the resolution and refresh rate of the the connected display and
the current output configuration are shown. These are read-only.
Input Status
The
Input Status
panel is read-only and shows the native resolution and refresh rate of
the input device and the currently selected EDID.
Input Configuration
The Input Configuration panel allow the input signal to be configured.
Aspect Ratio — Allows you go toggle between Follow and Fill .
•
Follow maintains the aspect ratio of the input signal.
•
Fill stretches the image so that it fills the entire screen.
HDCP Authorize — When this setting is enabled, HDCP-encrypted input signals pass to
the output display. HDCP Authorize is enabled by default.
TLI Pro 201 • On-screen Menus 16