Extron electronics StudioStation 100, Руководство пользователя

Страница: 21 / 131

StudioStation 100 • Installation 14
StudioStation 100 Rear Panel Reset
The
Reset
button on the rear panel of the StudioStation 100 (see
figure 3,
I
on
page 11) returns the StudioStation 100 to various modes of operation. There are three
unit reset modes (numbered 1, 4, and 5) that are initiated from the rear panel reset button.
To select different reset modes, use a pointed stylus or small screwdriver to press and hold
the
Reset
button while the StudioStation 100 is powered or press and hold the
Reset
button while applying power to the StudioStation 100.
NOTES:
• The reset modes listed in the StudioStation 100 Reset Modes table on the next
page close all open IP and Telnet connections and all sockets.
• Each reset mode is a separate reset (not a continuation from mode 1 to mode 5).
• Reset modes 2 and 3 are not available for the StudioStation 100.
•
The StudioStation 100 can also be reset using the web-based user interface
System Resets
on page 68.
• For information on resetting the StudioStation 100 using SIS commands, see
Resets on page 80.
ATTENTION:
• Review the reset modes carefully. Some reset modes delete all user loaded content
and revert the device to default configuration.
• Étudier de près les différents modes de réinitialisation. Certains modes de
réinitialisation suppriment la totalité du contenu chargé de l’utilisateur et remettent
l’appareil en mode de configuration par défaut.
See figure 6 for simple reset instructions and the StudioStation 100 Reset Modes table
for a summary of the reset modes.
RESET
RESET
RESET RESET
RESET RESET
RESET RESET
Press and hold
the Reset button.
Mode 1
Apply power to the
StudioStation 100.
Release Reset button.
Release, then immediately
press and release again.
Reset LED flashes, then goes off.
Mode 4
Reset LED flashes
twice
.
Press and hold
for 6 seconds.
Release, then immediately
press and release again.
Reset LED flashes, then goes off.
Mode 5
Reset LED flashes
three
times .
Press and hold
for 9 seconds.
Figure 6. Resetting the StudioStation 100
figure 6