Extron electronics SMP 111, Руководство пользователя

Страница: 61 / 124

SMP 111 • Web-Based User Interface 53
7. Recordings can be limited to a specific duration. If this feature is enabled, the SMP
stops recording an event after the specified number of hours.
1 2
Figure 46. Limit Recording Duration
To limit the recording duration:
a. Select (check) the Limit Ad hoc Recording Duration checkbox
(see figure 46,
1
).
b. Enter a number into the Maximum Recording Duration (Hours) field or use
the Up and Down arrows (
2
) next to the field to select a number from 0 to 8 hours.
•
By default the Limit Recording Duration checkbox is not checked and
there is no limit on duration.
•
Enter time in full hours only. Fractions of time will not be saved.
8. Click Save , or click Cancel to discard the changes.
NOTE: For a SMP 111 set for secondary storage mode with unlimited file size
selected, the recording saved on the internal storage drive is saved in a single file
unless the secondary storage was formatted as FAT32. Then both internal and
USB recordings will be saved into multiple 3.6 GB files, even when unlimited file
size is selected. Recording will create 3.6 GB as a result of the FAT32 size limit.
You can use a USB drive formatted for NTFS in order to avoid the file size limit.
Advanced Features
In the Advanced Features page within Configuration , an administrator can do the
following things:
• Set the SMP 111 to run a web browser client application for direct control on site for
limited network (IP) configuration when a network-connected computer is not available.
•
Upload a FlexOS plugin application to add functions and configuration options, then use
the plugin to configure features of the SMP.
These settings are available only via this page.
To open this page, click the
Configuration tab (at the top of the SMP 111 embedded
web pages) and then click the Advanced Features tab on the second tier of tabs (see
figure 47).
Figure 47. Configuration Tab, Advanced Features Subtab
The Advanced Features page opens (see figure 48), showing the
Browser Client (
1
) and FlexOS Apps (
2
) panels.
1
2
3
Figure 48. Advanced Features Page
figure 46
figure 47
figure 48