Extron electronics SMP 111, Руководство пользователя

Страница: 36 / 124

SMP 111 • Web-Based User Interface 28
If the unit is set for single storage mode (recordings are saved to only one storage drive),
choose a recording destination from the
Recording Destination drop-down list found
in the Start an Adhoc Recording dialog box (see figure 15).
Figure 15. Recording Destination Drop-down, Single Recording Destination
If the unit is not set to limit the recording destination, recording destination options are as
follows:
• Auto — The recording is saved to the first available storage location that is not full.
The user sets the priority for storage location in the Destination Recording
Priority field (go to Configuration > System Settings > Recording Media
Selection ).
•
If a USB drive has more than one logical volume, only the volume with the largest
free space for that port in the
Recording Destination drop-down list is used to
store content. All other volumes on that drive are ignored.
•
To record to another volume on the device the target location must be manually
selected rather than using the auto option.
• Internal — The recording is saved on the internal 32 GB SD card.
• usbfront/volume1 , usbfront/volume2 , usbfront/volume3 , usbrear/
volume1 , usbrcp/volume1 , and so forth — The recording is stored to the indicated
external USB drive connected to the front panel, rear panel, or recording control panel
USB storage port on the SMP.
If the unit
is
set to limit the recording destination, the storage location (internal, front USB,
rear USB) cannot be changed. However, if the unit is set to store recordings to one of the
USB ports, and if the connected drive contains more than one volume, a volume from the
Recording Destination drop-down list can be selected.
If the unit is set for secondary storage mode, the file is saved to two storage drives
simultaneously. By default, the recording is always saved to the Internal Drive as the primary
storage location, and only the secondary location is configurable.
NOTES:
• If the unit is set for secondary storage mode, the file is saved to two storage drives
simultaneously.
• In secondary recording mode, the secondary location is configurable. The primary
recording destination is always saved to the
Internal Drive .
• If the unit is set to use a front panel USB drive for the secondary storage location
but a drive is connected to the rear panel USB port instead of the front panel
port, the
Secondary Recording Location: drop-down list displays n/a (not
available or not applicable) as the only option.
• If no USB drive is attached to a particular port, the option for that port is not shown.
figure 15