4
Front Panel Features
SMD 202
INPUT
MENU
INPUT
ENTER
IR
HDMI
DECODER
CONFIG
A B C
D
E
F
G
H
I
Figure 5.
SMD 202 Front Panel
A
Power LED
–
Lights solid green when the SMD 202 is powered, blinks green during power up, and lights solid red when in
standby (low power) mode.
B
Playback status indicator
–
Dual-color LED indicates the current state of playback operation.
•
Solid Green
– The SMD 202 is actively decoding a stream or playing a file.
•
Blinking Green
– A stream or file is selected for decoding, but playback is paused.
•
Off
– The selected source is not being decoded.
•
Solid Red
– Lights during playback errors and when the source is unavailable.
C
Network status indicator
–
Dual-color LED indicates the current state of network operation and connection quality.
•
Solid Green
–
Indicates network conditions are favorable for the current source. The LED is also lit if the current source
is a local file.
•
Red/Green
– When flashing red and green, source or network conditions are marginal and might compromise image or
audio quality.
•
Solid Red
– Indicates server or network conditions are poor and are compromising video or audio quality.
•
Off
– No network connectivity.
D
IR receiver window
–
Allows remote operation using a compatible handheld IR remote control (optional).
E
Config port
–
Connect a control PC to this port with a mini-type B USB cable (not supplied). Use this port to send Simple
Instruction Set (SIS™) commands to the SMD 202 for device configuration and control.
NOTE:
For information on using this port for device configuration and control and for a list of available SIS commands,
see the
SMD 202 User Guide
.
F
Input indicators
–
•
HDMI
–
Indicates the rear panel HDMI input (see
figure 1
,
D
on page 1) is selected.
•
Decoder
–
Indicates the decoder is selected.
G
Menu selection button
–
Press to activate the interactive On-screen Display (OSD) menu system.
H
Input selection and OSD menu navigation buttons
–
By default, the up and down arrow buttons allow input selection
between HDMI or decoder inputs. Press
UP
to select the HDMI and
DOWN
to select the Decoder input.
When the OSD menu is active, the directional arrow buttons provide navigation within the OSD menu structure (see the
SMD 202 User Guide
for information about the OSD menu).
I
Enter button
–
Press to make a selection on the interactive OSD menu.
Change the IP Address using the OSD menus:
1.
Connect the external power supply to a 100 to 240 VAC, 50 or 60 Hz power source. The SMD 202 powers up and undergoes
a self testing sequence.
2.
Power up the display device. The SMD 202 reads the EDID of the display and sets the output resolution and format.
3.
Press
Menu
(see
figure 5
,
G
) to open the OSD menu (see figure 6, below).
4.
Navigate to the
Communications
submenu using the
UP
and
DOWN
arrow buttons (see
figure 5
,
H
).
