SM 28 Surface Mount Speaker • Installation
12
Attaching the Speaker to the Mounting Plate
ATTENTION:
•
By default, the SM 28 speaker is shipped unlocked. When mounting the speaker
to the mounting plate, be sure that the speaker is unlocked. Failure to place
the speaker in the unlocked position will result in damage to the speaker lock
mechanism should an attempt be made to mount a locked speaker (see “
Using
the Security Key to Lock and Unlock the Speaker
” on page 14).
•
Par défaut, l’enceinte SM 28 est livrée en mode déverrouillé. Lors du montage de
l’enceinte sur la plaque de montage, assurez-vous que l’enceinte soit déverrouillée.
Si elle n’est pas déverrouillée avant son montage sur la plaque, elle pourrait subir
des dommages au niveau de son mécanisme de verrouillage (voir « Utiliser la clé de
sécurité pour le verrouillage et le déverrouillage de l’enceinte »).
NOTE
:
If the secondary attachment point is being used, see the “
Attaching a
Secondary Support Cable
” on the previous page for installation details before
proceeding further.
Position the rear mounting slot of the speaker above the catch tab of the mounting plate,
then slide the speaker down into the mounting plate until a click is heard indicating that
the speaker is secured in place (see figure below). When properly seated, the speaker
connections are automatically made.
Catch Tab
Vertical Mounting
Figure 13.
Attaching the Speaker to the Mounting Plate
