background image

Relay Control Modules • Specifications, Part #s, Dimensions

Relay Control Modules • Specifications, Part #s, Dimensions

Specifications, Part #s, Accessories, Dimensions

A-3

Included Parts

These items are included in each order for a control module:

Included parts

Part number

RCM-SC (grey, black, white)

70-183-01, -02, -03

RCM-SCLT (grey, black, white)

70-184-01, -02, -03

3.5 mm, 5-pole captive screw connectors

10-319-10

1N4001 or equivalent diodes

(100mA max. current, 50V max. reverse bias)
for Da Lite and Draper installations

Relay Control Modules User’s Manual

68-631-01

Accessories

Accessories

Part number

AAP 102 (grey, black, white)

 (2 gang)

60-300-01, -02, -03

AAP 104 (grey, black, white)

 (4 gang)

60-301-01, -02, -03

Cables

Comm-link cable

Part number

50 feet/15.2 meters long

26-461-01

100 feet/30.5 meters long

26-461-02

Conductor gauges in Extron Comm-Link cables

red and black single strands (for power/ground)

18 AWG

white and violet shielded single strands (for signals)

22 AWG

drain wire

24 AWG

or

A-2

Specifications

General

Power ............................................. 12VDC from the MLC 206
Temperature/humidity .............. Storage -40° to +158°F (-40° to +70°C) /

10% to 90%, non-condensing
Ope32° to +122°F (0° to +50°C) /
10% to 90%, non-condensing

Rack mount ................................... Yes, with optional faceplate, and

furniture/wall mountable with optional
faceplates or AAP wall plates

Enclosure type .............................. Metal
Enclosure dimensions

Faceplate ................... 1.4" H x  3.5" W x 0.1” D  (3.5 cm H x  8.9

cm W x 0.3 cm D) (double space high AAP
plate)

Boards ........................ 1.3" H x  2.6" W x  0.9" D

(3.3 cm H x  6.6 cm W x 2.3 cm D)
(Depth excludes buttons.  Allow at least
2.1” (5.3 cm) depth in the wall/furniture.)

Product weight ............................. 0.1 lbs (<0.1 kg)
Shipping weight ........................... 1 lbs (0.5 kg)
Vibration ....................................... ISTA/NSTA 1A in carton (International

Safe Transit Association)

Listings .......................................... UL, CUL as components of the MLC 206
Compliances ................................. CE, FCC Class A, VCCI, AS/NZS, ICES as

components of the MLC 206

MTBF ............................................. 30,000 hours
Warranty ....................................... 3 years parts and labor

Specifications are subject to change without notice.

(7.32-112601-D1)

Содержание SCP 150 AAP
















Отзывы: