Quantum Ultra Videowall Processing System • Maintenance — Quantum Ultra 610 Only
86
4.
As you rotate the lever, the power supply slides toward the right. Continue sliding the
power supply to the right as far as possible (see figure 79,
1
).
Slide the power supply unit to the right.
Slide the unit out.
1
1
2
2
Figure 79.
Rotating the Latch and Sliding the Power Supply to the Right and
Out
5.
Lift the power supply up slightly and slide it toward you, out of the chassis (
2
).
6.
Slide the new power supply into the empty slot vacated by the old power supply, until
its back panel is flat against the back wall of the power supply compartment.
79