manualshive.com logo in svg

Extron electronics Quantum Ultra 305, Руководство пользователя, Страница: 19 / 111

Поделиться
Скачать
Extron electronics Quantum Ultra 305 Скачать руководство пользователя страница 19

Quantum Ultra Videowall Processing System • Installation and Configuration

11

Installation and 
Configuration

This section provides the steps to install the Quantum Ultra processor. It also describes 
the rear panel components and provides instructions for cabling. 

• 

Installation Steps

• 

Front Panel Features

• 

Rear Panel Features

• 

Input and Output Cards

• 

Adjusting for Edge Blending and Mullion Compensation

• 

Connecting to a Network

• 

RS-232 Insertion - DTP Outputs Only

Installation Steps

The Quantum Ultra processor can be mounted in a 19-inch equipment rack or placed 
on furniture. To install and set up the Quantum Ultra processor for a videowall, follow the 
steps below (see 

Application Examples 

starting on page 11 for examples).

1. 

Disconnect power from the Quantum Ultra and all other equipment in the system. 

2. 

If desired, rack mount the unit (see 

Mounting the Quantum Ultra

 on page 100).

3. 

Connect HDMI sources and LAN connections to the installed input cards. 
Connect HDMI displays, DTP or HDBaseT receivers, or an XTP matrix switcher to the 
connectors on the installed output cards as appropriate. 

4. 

Secure each HDMI connector with a provided LockIt bracket (see 

HDMI LockIt 

Cable Lacing Brackets

 on page 16).

NOTE:

 

With adapters, DVI is available on the HDMI ports.

5. 

Connect a control device or computer for remote control to:

a. 

The rear panel RJ-45 LAN A or LAN B jack to enable configuration and control of 
the Quantum via Simple Instruction Set (SIS) commands (see 

SIS Commands

 

starting on page 55) or VCS (LAN A recommended) (see the 

VCS Help File

), or 

for streaming a VNC source (LAN B recommended).

b. 

(Optional) The rear panel USB mini-B Config connector to enable control via VCS 
or SIS commands.

c. 

(Optional) The rear panel 3-pole captive screw RS-232 connector to enable serial 
control via SIS commands.

6. 

Connect AC power to the IEC connectors of the Quantum Ultra primary and 
redundant (optional) supplies.

NOTE:

  Temperature controlled fans run at 100% as a failsafe if only one power 

supply is operational.

Содержание Quantum Ultra 305
















































































































Отзывы:

Нет отзывов