6
NAVigator • Setup Guide (Continued)
Discover and assign encoders and decoders
Discover and assign encoders and decoders (endpoints) to the NAV system as follows:
NOTE:
You can also pair encoders and decoders to each other using the device
ID
buttons on the endpoints (see the applicable
encoder and decoder guides available at
www.extron.com
).
TIP:
Press and release the device
ID
button on the front panel of an endpoint to highlight the
ID
field on the HTML page for that
,
on page 7). This can help identify the device. Press and release the button again to clear the highlight.
1.
On the home page, if necessary, click the
Menu
link (see figure 8,
1
). Click
Endpoints
(
2
)
>
Discover
Endpoints
(
3
). The
Assign
Endpoints
panel opens (see
).
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Figure 8.
Discover Endpoints
NOTE
:
If you are adding to an existing set of assigned endpoints, at this point the endpoints pane shows the existing endpoints.
Click the
Discover
link instead (see figure 9,
1
) to add new endpoints.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Figure 9.
Appearance of Endpoints Panel when Adding to Existing Endpoints