Specifications, cont'd
A-6
MTP T 15HD A Architectural Plates • Specifications
FCC Class A Notice
Note: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference, in which case the
user will be required to correct the interference at his own expense.
Note: This unit was tested with shielded cables on the peripheral devices. Shielded
cables must be used with the unit to ensure compliance.
Extron’s Warranty
Extron Electronics warrants this product against defects in materials and workmanship
for a period of three years from the date of purchase. In the event of malfunction during
the warranty period attributable directly to faulty workmanship and/or materials,
Extron Electronics will, at its option, repair or replace said products or components,
to whatever extent it shall deem necessary to restore said product to proper operating
condition, provided that it is returned within the warranty period, with proof of
purchase and description of malfunction to:
USA, Canada, South America,
Europe, Africa, and the Middle East:
and Central America:
Extron Electronics, Europe
Extron Electronics
Beeldschermweg 6C
1001 East Ball Road
3821 AH Amersfoort
Anaheim, CA 92805, USA
The Netherlands
Asia:
Japan:
Extron Electronics, Asia
Extron Electronics, Japan
135 Joo Seng Road, #04-01
Kyodo Building,
PM Industrial Bldg.
16 Ichibancho
Singapore 368363
Chiyoda-ku, Tokyo 102-0082
Japan
This Limited Warranty does not apply if the fault has been caused by misuse, improper
handling care, electrical or mechanical abuse, abnormal operating conditions or non-
Extron authorized modification to the product.
If it has been determined that the product is defective, please call Extron and ask for an
Applications Engineer at (714) 491-1500 (USA), 31.33.453.4040 (Europe), 65.6383.4400
(Asia), or 81.3.3511.7655 (Japan) to receive an RA# (Return Authorization number). This
will begin the repair process as quickly as possible.
Units must be returned insured, with shipping charges prepaid. If not insured, you
assume the risk of loss or damage during shipment. Returned units must include the
serial number and a description of the problem, as well as the name of the person to
contact in case there are any questions.
Extron Electronics makes no further warranties either expressed or implied with respect
to the product and its quality, performance, merchantability, or fitness for any particular
use. In no event will Extron Electronics be liable for direct, indirect, or consequential
damages resulting from any defect in this product even if Extron Electronics has been
advised of such damage.
Please note that laws vary from state to state and country to country, and that some
provisions of this warranty may not apply to you.
Dimensions
N
The drawings in this section are not full size.
Do not scale.
MTP T 15HD A WM
MTP T 15HD A D
MTP T 15HD A AAP
2.610
2.005
1.545
.984
.000
Ø.132 V THRU
Ø.258 THRU
2X EXTRUSION FOR
#6-32 SCREW
TAPPING
.000
7X
.6
45
1.290
COMPUTER IN
AUDIO IN
MTP T 15HD A
4.500
3.890
0.610
1.550
2.010
2.570
3.392
COMPUTER IN
AUDIO IN
0.000
0.
00
0
2.
79
0
1.
39
5
ø 0.156 THRU WITH
ø 0.290 X 82° C'SINK (2 PLACES)
ø 0.330 THRU
WITH
ø 0.562 C'BORE
0.070 DEEP
ø 0.125 THRU
.000 [0.000]
.295 [7.493]
2X .342 [8.687]
3X .695 [17.653]
2X 1.047 [26.594]
1.390 +.000
-.015
[
35.306+0.000
-0.381
]
.000 [0.000]
2X .250 [6.350
]
.650 [16.510]
1.
05
0
[2
6.
67
0]
1.
51
0
[3
8.
35
4]
2.
85
0
[7
2.
39
0]
2X
3
.2
50
[8
2.
55
0]
3.
50
0
[8
8.
90
0]
2.
07
1
[5
2.
60
3]
1.095 [27.813]
4X R.050 [R1.270]
Ø.258 [Ø6.553]
THRU
Ø.132 [Ø3.353] THRU
COMPUTER
IN
AUDIO IN
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
