Extron electronics MTP R AV, Руководство пользователя

Страница: 15 / 27

MTP AV Series • Installation 9
Transmitter and Receiver Throughput Connections
Figure 12 identifies the connections between the transmitter and receiver.
12V
0.5A
MAX
OUTPUT
PO
WER −
+
MTP Transmitters MTP Receivers
INPUT
L R
MTP T AV
OUTPUT VIDEO
12V
0.5a
INPUT
MTP T SV A RCA
OUTPUT
MAX
12V
0.5a MAX
S-VIDEO
L R
OUTPUT
MTP R SV A RCA
INPUT
S-VIDEO
12V
0.5a MAX
OUTPUT
MTP R AV
L R
INPUT
VIDEO
12V
0.5a MAX
R
L
1 1
1
Figure 12. Throughput Connections
CAUTION:
Do not connect these devices to a computer data network or a
telecommunications network.
NOTE:
RJ-45 termination must comply with the TIA/EIA T 568A or TIA/EIA T 568B
wiring standards for all connections (see
figure 13)
.
a
Transmitter output and receiver input connector — Connect one end of a TP cable
to this RJ-45 female connector on the transmitter. On the MTP T AV AAP the connector
is at the end of a short pigtail.
Connect the free end of the same TP cable from the transmitter to the RJ-45 female
connector on the receiver.