Extron electronics MPS 601, Руководство пользователя, Страница: 42 / 59

MPS 601 • Software Configuration and Control 34
Audio Config Page
The MPS 601 audio provides three modes to switch active digital and analog audio inputs
to the output. Click
Audio Config
to access the configuration options (see figure 39,
1
).
Audio input A follows input 1.
Audio input B follows input 2.
Audio input A follows input 1 and 2.
Audio input A is grouped to inputs 1, 3 and 5.
Audio input B is disabled.
Audio input B is grouped to inputs 2, 4 and 6.
Mode 1
Mode 2
Mode 3
2 2
3 3
4 4
1 1
Figure 39. Audio Configuration
Audio Configuration
2
Mode 1 (default) – The associated audio input follows the selected input.
•
Audio input A follows input 1.
When input 1 is selected, RGBHV 1 video and audio input A are routed to the HDMI
output.
•
Audio input B follows input 2.
When input 2 is selected, RGBHV 2 video and audio input B are routed to the HDMI
output.
•
When inputs 3, 4, 5, or 6 are selected, the embedded audio of the selected input is
routed to the HDMI output.
3
Mode 2 – Audio input A is grouped with the analog inputs.
•
When input 1 or input 2 is selected, video from the selected input and audio from
audio input A is routed to the HDMI output.
•
Audio input B is disabled.
•
When inputs 3, 4, 5, or 6 are selected, the selected HDMI video and embedded
audio is routed to the HDMI output.
4
Mode 3 – Audio input A is grouped with inputs 1, 3, and 5. Audio input B is grouped
with inputs 2, 4, and 6.
•
When input 1 is selected, the selected video and audio input A are routed to the
output.
•
When input 2 is selected, the selected video and audio input B are routed to the
output.
•
When input 3 or input 5 is selected, the selected HDMI video signal is routed to the
output. If embedded digital audio is present on the HDMI input, it is routed to the
output. If no digital audio is present, audio input A is routed to the output.
•
When input 4 or input 6 is selected, the selected HDMI video signal is routed to the
HDMI output. If embedded digital audio is present on the selected HDMI input, it
is routed to the output. If no digital audio is present, audio input B is routed to the
output.
NOTE: When a 4K resolution signal is present on the selected HDMI input, analog
audio cannot be substituted for the embedded audio.
39