Extron electronics MPS 601, Руководство пользователя

Страница: 18 / 59

Cabling the MPS 601 Switcher
The switcher can be connected to as many as six input devices (RGBHV and HDMI). It can
output to one HDMI device or display. Follow the steps below and the installation example
(see
figure 1
on page 1).
1. Turn off power to the switcher and all devices that will be connected to it.
2. Mount the switcher (see Mounting Options on page 46).
3. Attach up to two analog RGBHV, and four HDMI (or DVI-D with appropriate adapters)
sources (see
Connections on page 4).
4.
Connect the HDMI output to a compatible display device (see
Connections
).
5. For analog audio input, connect audio sources to the audio inputs corresponding to the
RGBHV video inputs (see
Connections ).
6. Connect a control PC or control device to the switcher using:
a. The rear panel RS-232 port and a 3-pole captive screw connector (see Remote
Control Port (RS-232) on page 37).
b.
The front panel USB configuration port (see
Front Panel Configuration Port
on
page 38).
7. Power up the input and output devices, then connect power to the rear AC connector
of the switcher.
MPS 601 • Installation 10