1
MLS 608 D Series • Setup Guide
Rear Panel Features — MLS 608 D and MTP HDMI U R
NOTE:
The MLS 608 D SA, as shown below, is representative of the MLS 608 D Series. It has the maximum number and type of
connectors and features of the three models. The MLS 608 D model lacks the power amplifier output.
The Extron MLS 608 D Series are eight input, multi-format AV switchers with ProDSP
™
audio
and are able to integrate analog and digital sources. There are three models:
• MLS 608 D (with variable preamp output - no amplifier)
• MLS 608 D MA (with 40 watt 70 volt mono power amplifier)
• MLS 608 D SA (with 2 x 20 watt stereo power amplifier)
This guide allows you to easily and quickly setup and configure your MLS 608 D using step by step instructions. It covers performing
basic operations using the front panel controls and selected Simple Instruction Set (SIS
™
) commands.
It also gives connection information for the MTP HDMI U R twisted pair receiver, which is supplied with the MLS 608 D Series unit.
See rear cover for a diagram of a typical MLS 608 D application, showing the MLS 608 D SA model.
NOTE:
For full installation, configuration, and operation details for all MLS 608 D models, see the MLS 608 D Series User Guide,
and for complete details on the MTP HDMI U R, see the MTP HDMI U R User Guide, both available at
www.extron.com
.
1
BUFFERED OUTPUT
MTP
+
AUDIO
+12 V OUT
PWR OUT=
12W
2
3
6
L
R
1
L
R
2
L
R
3
L
R
5
L
R
7
L
R
8
1
2
1
2
MIC/LINE
+ 48V
1
2
L
R
L
R
Tx
+12V
Rx
8
4 (MTP)
CONFIGURABLE ANALOG INPUTS
AUDIO INPUTS
AUDIO OUTPUTS
RS-232
HOST
PWR OUT = 7.2 W
DIGITAL OUTPUT
VIDEO + RS-232
ANALOG OUTPUT
DIGITAL INPUTS
5
7
L
R
6
Tx
N/
A
N/
A
Rx
RS-232 INSERT
MLS 608 D SA
100-240V 50/60 Hz
1.2A MAX
1
2
4/8 OHM - 20W x 2
1
4
7
8
5
13
12
11
9
14
MLS 608 D SA
2
3
10
6
Power input
MTP input
RS-232 port (analog side), not used in MLS 608 D system
Digital signal inputs (1 and 2)
RGBHV, RGBS output*
Composite video output*
Digital (HDMI) output
S-video output*
Component video (R-Y, Y, B-Y) output*
RS-232 pass-through connector
Mono audio output
* = Analog outputs
DIGITAL OUTPUT
DIGITAL INPUT
POWER
12V
0.8A MAX
1
2
HDMI
RS-232
PASS THRU
Tx Rx
RGB
VID
Y/C
B-Y
Y
R-Y
ANALOG OUTPUTS
RS-232
Tx Rx
SPARE
MTP INPUT
1
MONO AUDIO
2
MTP/HDMI U R
A
B
C
F
D
A
G
H
E
K
I
J
Pin T568A Wire Color
T568B Wire Color
1
White-green
White-orange
2
Green
Orange
3
White-orange
White-green
4
Blue
Blue
5
White-blue
White-blue
6
Orange
Green
7
White-brown
White-brown
8
Brown
Brown
Power, Analog, and Digital Connections
Audio and RS-232 Connections
a
AC power connector
i
Audio inputs: 5-pole captive screw connectors (inputs 1-3, 5-8)
b
RGB, component/S-video/composite inputs: 15-pin HD
connectors (inputs 1-3, see rear page for pinout details)
j
Mic/line level audio inputs (1-2): 3-pole captive screw connectors
and phantom power LEDs
c
Buffered output: 15-pin HD connector (tied only to input 1)
k
Line level audio output: 5-pole captive screw connectors
(audio outputs 1-2)
d
Universal MTP RJ-45 connector (input 4, see rear page for
pinout details)
l
Power amplifier output connector (MA and SA units only)
e
12 V output MTP/HDMI U R power source: 2-pole captive
screw connector
m
RS-232 control/configuration port and +12 V power output
(for optional MLC power source): 5-pole captive screw connector
f
Analog video and audio MTP output: RJ-45 connector
n
RS-232 insertion pass-through port: 5-pole captive screw connector
g
Digital inputs: HDMI connectors (inputs 5-8)
h
Digital video and RS-232 outputs: RJ-45 connectors
