MGP Pro Series • HTML Configuration and Control
78
HTML Configuration
and Control
This section provides procedures for accessing and using the MGP Pro embedded web
pages. Topics include:
•
•
•
•
Using the File Management Page
•
The MGP Pro series can be controlled and configured using HTML web pages that are
accessed over a network or from a local PC connected to the MGP Pro LAN port. The
MGP Pro has factory-installed HTML web pages that allow you to view and adjust IP
settings, upload firmware and other files to the MGP Pro, and select a background image
for the display. Access these HTML pages using a web browser such as Microsoft
®
Internet
Explorer
®
.
NOTE:
Administrators have access to all of the web pages and are able to make
changes to settings. Users can access the pages on the
System
Status
and
Background
tabs only.
Accessing the Web Pages
To access the MGP Pro HTML web pages:
1.
Start the web browser program.
2.
Enter the MGP Pro IP address in the browser
Address
field.
NOTE:
If your local system administrators have not changed the address, use the
factory-specified default, 192.168.254.254, for this field.
3.
If you want the browser to display a page other than the default (such as a custom page
that you have uploaded to the MGP), enter a slash (
/
) and the name of the file to open.
NOTES:
•
The browser
Address
field should display the address in the following format:
nnn.nnn.nnn.nnn/optional_file_name.html
•
The following characters are invalid in file names:
{space}
~ @ = ` [ ] { } < > ' " ; : | \
and
?
.
