Extron electronics ISS 608, Руководство по установке

Страница: 4 / 6

4
ISS 608 • Setup Guide (Continued)
Configure and Recall a Logo Preset
NOTE: User images must first be uploaded via Extron Product Configuration Software (PCS) available at www.extron.com .
To configure a logo preset
(see
figure 4
on page 2):
1.
Press the
MENU
button (
C
) to go to the
Background/Logo Configuration
menu.
2. Press the NEXT button ( C ) to go to the
Logo Select
submenu.
3. Rotate the ADJUST
[
knob (
G
) to select the logo preset to configure.
4. If needed, rotate the ADJUST
{
knob ( G ) to change the assigned image file (the image file shows on the preview output).
5. Press the NEXT button to adjust the position of the logo.
6. Rotate the ADJUST
[
knob to adjust the horizontal (
H
) position and rotate the ADJUST
{
knob to adjust the vertical (
V
)
position.
7. Press the NEXT button to select a
Logo Key Effect,
if desired.
8. Rotate the left and right ADJUST knobs to select the
Logo Key Effect
( Transparency , RGB , Level , or Alpha ).
To recall a logo preset:
1. Press the LOGO button (if no logo preset was previously selected,
Logo Error
shows on the LCD screen for 2 seconds).
2. Rotate the ADJUST [ knob to select the logo preset.
3. Wait a second or press the NEXT button and the logo preset is recalled onto the preview output.
4. Press the TAKE button to switch the preview output, with the included logo preset, to the program output using the selected
effect, displaying the logo preset on the program output.
• A different logo preset can be recalled or removed on the preview output by pressing the LOGO button again.
5. Press the TAKE button again to switch the preview output to the program output.
• If a different logo preset was recalled on the preview output, the new logo preset is displayed on the program output.
• If no logo preset is on the preview output, the logo on the program output is removed.
NOTE: The
LOGO
button lights solid if there is a logo on preview output but not on program output. The
LOGO
button
blinks if there is a logo on program output whether there is a logo on preview output or not.
Recall Layout Presets
Layout presets are used to preconfigure a presentation prior to going live. This minimizes missed cues or incorrect video layout. A
layout preset captures transition effect settings, a logo preset, the input channel, and any picture control adjustments made to the
preview output. When recalled, layout presets apply the settings to the preview output to review the configuration before
TAKE is
pressed to make it live on the program output.
1. Press the RECALL / SAVE button (see figure 4 ,
D
on page 2) to go to the
Recall Layout
menu.
2.
Rotate either ADJUST knobs to select a saved
Layout Preset
.
3.
Press the
ENTER
button to recall the selected preset to the preview output.
Adjust the size and position of the Program or Preview
The size and position of the program or preview can be adjusted using the ADJUST SIZE and POSITION buttons ( E ).
• Press SIZE or POSITION buttons to toggle between the
PREVIEW
image and the
PROGRAM
image adjustments.
• When the PIP (
C
) effect is selected, the SIZE and POSITION buttons cycle through the
PIP
window,
PIP
image, and
program image adjustments.
ISS 608 Configuration
To configure the ISS 608 switcher, available methods include front panel controls, Extron Product Configuration Software (PCS),
and Simple Instruction Set (SIS) Commands.
• Front Panel Controls
To configure network settings using the front panel controls:
1.
Press
MENU
(
G
) repeatedly to access the
View Comm Settings
submenu.
2.
Press and hold
NEXT
for approximately 5 seconds until the submenu changes to
Edit Comm Settings
.