4
IN1808 • Setup Guide (Continued)
Front Panel Overview
Figure 2 shows the front panel of the IN1808 IPCP SA and IPCP MA 70. The IN1808 base model is 1U high and has no IPCP Pro
LEDs (
H
).
A
B
E
F
H
G
C
D
Figure 2.
Front Panel Features, IN1808 IPCP SA and IN1808 IPCP MA 70
A
Config port
B
Input selection buttons (1 through 8)
C
Logo
button
D
Signal and Status LEDs
E
Menu
and
Enter
buttons
F
Navigation buttons
G
Mic
and
Volume
knobs and LEDs
H
IPCP Pro LEDs (IPCP models only)
A
Front panel configuration port
— Connect a host device to the USB mini-B port for device configuration, control, and
firmware upgrades
B
Input selection buttons
(
1
through
8
) — Press one of these buttons to select an input. The buttons light amber for audio
and video, green for video only, or red for audio only.
C
Logo button
— Press this button to enable or disable the most recently selected logo slot. Press and hold the button to
select logo slot
1
through
8
using the input selection buttons (slots 9-16 are available via SIS commands only). See the
IN1806 and IN1808 Series User Guide
at
www.extron.com
for more information about logos.
D
Status LED indicators
•
Input signal LEDs
— These eight LEDs light green for their corresponding inputs when active video content is detected
on that input.
•
Output signal LEDs
— Output LEDs 1A, 1B, and Loop light green when active video is being output, and blink amber
when output video and sync are disabled.
•
Input HDCP LEDs
— These eight LEDs light green for each input signal that is HDCP-encrypted.
•
Output HDCP LEDs
— These three LEDs light green for an output when it is currently HDCP-encrypted.
•
DTP2 and DTP Input LEDs
— These two LEDs light green if DTP or DTP2 power has been enabled on the
corresponding input.
•
DTP2 and DTP Output LEDs
— These Output LEDs light green if DTP or DTP2 power has been enabled on DTP
output 1B.
E
Menu and Enter buttons
— Press these buttons to access and navigate the on-screen display menu system.
F
Navigation buttons
— Press these buttons to navigate through the on-screen display menu system or change settings.
G
Mic and
Volume knobs and LED indicators
— Rotate the
Mic
knob to adjust the microphone level. Rotate the
Volume
knob to adjust the program or output volume level (configurable, see the
IN1806 and IN1808 Series PCS Help File
for more
information). The eight LED indicators for each knob light according to the level being adjusted. The LEDs light in order from
bottom to top to indicate steps from 1% (-99 dB) to 99% (-1 dB). The bottom LED blinks when the volume is muted. The top
LED blinks when the volume is at 100% (12 dB).
H
IPCP Pro LED indicators
— IPCP models only (see the
IPCP Pro Series Setup Guide
for details).
Firmware Updates
Download firmware updates from the Extron website and upload them via the internal web pages or PCS.
