1
IMPO
RTAN
T:
Go to ww
w.extr
on.com
for the complete
user guide
, installation instructions,
and
specifications bef
ore connecting the
product to the po
wer sour
ce.
IN1808 Series • Setup Guide
The Extron IN1808 Series are eight-input seamless scaling presentation switchers that support signal resolutions up to
4K @ 60 Hz at 4:4:4. They feature DisplayPort, HDMI, and DTP2 inputs, HDMI output and a mirrored Extron DTP2 output
extension to send video, audio, and control signals up to 330 feet (100 meters) over a shielded CATx cable. The IN1808 IPCP SA
and IN1808 IPCP MA 70 models each have a built-in Extron IPCP Pro 355M IP Link Pro Control Processor, and an integrated
100 watt class D power amplifier. The IN1808 Series delivers high image quality, fast and reliable switching, Extron ProDSP audio
processing, seamless video transition effects, logo keying, and HDMI loop out. The scalers can be controlled and configured over
Ethernet, RS-232, or USB.
This guide provides instructions for an experienced user to set up and configure the IN1808 (base model), IN1808 IPCP SA,
and IN1808 IPCP MA 70 scalers. It covers how to perform basic operations using the front panel controls and selected Simple
Instruction Set (SIS™) commands.
NOTES:
•
For full installation, configuration, menus, connector wiring, and operation details, see the
IN1806 and IN1808
Series User Guide
at
www.extron.com
. For installation, configuration, and operation details of the embedded
IPCP Pro 355M, see the
IPCP Pro Series User Guide
.
•
The IN1808 Series products can also be configured via the Extron Product Configuration Software (PCS), available at
www.extron.com
. For information on using PCS, see the
IN1806 and IN1808 Series Help File.
Installation
IN1808 Series Rear Panel Connectors
Figure 1 shows the rear panel of the IN1808 IPCP SA rear panel. The IN1808 IPCP MA 70 rear panel is the same except that
the embedded amplifier is mono while the SA model amplifier is stereo. The IN1808 base model rear panel does not have an
embedded IPCP Pro 355M module (see figure 1,
P
) or amplifier module (
N
).
2x25W(8Ω)/2x50W(4Ω)
L
R
CLASS 2 WIRING
AMPLIFIED OUTPUT
OUTPUTS (DTP/XTP/HDBT)
AUDIO INPUTS
OUTPUTS
HDMI/CEC
OVER TP
1A
1B
SIG LINK
OUT
Tx Rx
IR
G
1
2
3
4
+48V
+48V
1
2
MIC/LINE
L
R
AUX
3
4
INPUTS (DTP2/XTP)
LOOP OUT
3
1
2
5
4
6
7
SIG LINK
IN
8
SIG LINK
IN
REMOTE
Tx Rx
RS-232
G
RESET
100-240V~1.5A MAX
50-60 Hz
IN1808 IPCP SA
LAN
AV LAN 2
AV LAN 3
AV LAN 1
Tx Rx
RTS CTS
G
Tx Rx G Tx Rx G
R
1 2 3 4 G
DIGITAL I/O
COM 3
COM 2
COM 1
S
S
G
G
1
1
2
2
C
3 4 C
+S G
-S
+V
PWR OUT = 6W
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
IR/SERIAL
eBUS
RELAYS
A
C
H
B
O
E
F G
J
KL
N
Q
P
D
M
I
Figure 1.
Rear Panel Connectors, IN1808 IPCP SA
A
AC power connector
B
DisplayPort input connector (input 1)
C
HDMI (with CEC) loop out connector
D
DTP2/XTP input connectors (inputs 7
and 8)
E
HDMI (with CEC) output connector (1A)
F
DTP2/XTP/HDBaseT (with CEC) output
connector (1B)
G
Over TP IR pass-through connector
H
Analog line audio inputs 3 and 4
I
Analog mic/line audio inputs 1
and 2 and adjacent phantom
power LEDs
J
Analog line audio outputs 1
through 4
K
Remote RS-232 port
L
Reset LED
M
Reset button
N
Amplified audio output (IPCP models
only)
o
Aux mono or stereo analog line
audio input connector
P
IPCP Pro 355M Control Processor
(IPCP models only)
Q
HDMI inputs 2 through 6
R
LAN connector (IN1808 base model
only, see the note and illustration
below)
NOTE:
The IN1808 base model has a LAN connector to the left of the Remote RS-232 connector
(see
R
in the illustration at right) instead of the AV LAN ports on the IPCP Pro 355M control
processor.
100-240V 50/60 Hz
--A MAX
3
1
2
5
4
6
HDMI/CEC
INPUTS
OUTPUTS
AUDIO INPUTS
OUTPUTS
REMOTE
OVER TP
IN1808
7
SIG LINK
IN
8
1A
DTP2/XTP II
SIG LINK
IN
1B
SIG LINK
OUT
DTP2/XTP/HDBT
LOOP OUT
Tx Rx
RS-232
G
Tx Rx
IR
G
RESET
1
2
3
4
+48V
+48V
1
2
MIC/LINE
L
R
AUX
3
4
LAN
100-240V 50/60 Hz
--A MAX
3
1
2
5
4
6
HDMI/CEC
INPUTS
OUTPUTS
AUDIO INPUTS
OUTPUTS
REMOTE
OVER TP
IN1808
7
SIG LINK
IN
8
1A
DTP2/XTP
SIG LINK
IN
1B
SIG LINK
OUT
DTP2/XTP/HDBT
LOOP OUT
Tx Rx
RS-232
G
Tx Rx
IR
G
RESET
1
2
3
4
+48V
+48V
1
2
MIC/LINE
L
R
AUX
3
4
LAN
R
