IN1608 xi Scaling Presentation Switcher • Internal Web Pages
88
Internal Web Pages
The scalers feature an on-board web server, displayed as a set of internal web pages. These
pages allow for control and operation of the scaler through a LAN or WAN connection. Use
a web browser to view the pages on a PC connected to the scaler.
NOTE:
The scaler internal web pages do not support compatibility mode in Microsoft
®
Internet Explorer
®
(see “Turning Off Compatibility Mode”). Extron recommends using
Mozilla
®
Firefox
®
or Google Chrome™.
This section gives an overview of the internal web pages, which are always available and
cannot be erased or overwritten. Topics in this section include:
•
•
•
•
Using the Internal Web Pages
Accessing the Internal Web Pages
1.
Connect the scaler to a LAN or WAN using the rear panel RJ-45 LAN connector (see
, on page 19). For IPCP models, you can also use one of the AV LAN
on page 20).
2.
Open a web browser on a connected PC.
3.
Enter the IP address of the device in the browser
Address
field.
NOTE:
The default IP address is 192.168.254.254.
4.
Press the <
Enter
> key on the keyboard.
5.
The scaler checks if the device is password-protected.
•
If the device is not password-protected, the web pages open.
•
If the device is password-protected, enter a user name entry (
user
or
admin
) in the
User
Name
field and the password in the
Password
field when prompted.
6.
Click the
OK
button.
Navigating the Internal Web Pages
The internal web pages open with two main tabs:
Configuration
,
on page 91) and
Hardware
, on page 124). Below the tabs is a global
navigation bar with icons that open various pages for configuration settings and information.
Each page is separated into the
AV
Controls
panel and the individual page.
