IN1608 xi Scaling Presentation Switcher • Operation
29
Quick Setup Submenu
Figure 24.
Quick Setup Submenu
The
Quick
Setup
submenu provides quick access to common input, output, and
communication settings. This submenu contains the following items:
•
Auto-Image
— Press the
Enter
button to perform a one-time Auto-Image to size and
position the current input (see
on page 32).
•
Input Format
— Press the navigation buttons to select the desired video input format
(see
on page 33). The current input is displayed in the title of the
submenu.
•
Input EDID
— Press the navigation buttons to select a discrete EDID or match the
output resolution (see
on page 33). The current input is displayed in the title of the
submenu.
•
Output Resolution
— Press the navigation buttons to select from a list of output
resolutions and refresh rates (see
on page 35). There are eight custom
options, prefaced by
C1
through
C8
. The default setting is
720p
@
60 Hz
.
•
Audio Mute
— Press the navigation buttons to globally mute or unmute the audio.
•
Test Pattern
— Press the navigation buttons to select an available test pattern to
display or to turn a test pattern off (see
on page 39). The available test
patterns are
Crop
,
Alternating Pixels
,
Color Bars
,
Grayscale
,
Blue Mode
, and
Audio
Test
Pattern
(pink noise). The default setting is
Off
.
•
DHCP Mode
— Press the navigation buttons to enable or disable DHCP mode.
•
IP Address
— Press the
and
buttons to change octets. Press the
>
and
<
buttons to change the value of a selected octet.
