Extron electronics IN1404, Руководство пользователя

Страница: 33 / 46

IN1404 User’s Manual 31
Command Description
BV? return vertical blanking
CH1 select channel 1
CH2 select channel 2
CH3 select channel 3
CH4 select channel 4
CH? return channel
CMDCD0 set delimiters to brackets []**
CMDCD1 set delimiters to braces { }
CMDCD2 set delimiters to parentheses ()
CMDCD3 set delimiters to less and greater < >
CMDCD4 set delimiters to slashes \ /
CMDCD5 set delimiters to signs !#
CON+ increase contrast
CON- decrease contrast
CON@ set contrast to normal** (128)
CONxxx set contrast to absolute value (000-255)
CON? return contrast
CTF0 select comb filter**
CTF1 select trap filter
CTF2 set both comb and trap filters off
CTF? return comb/trap filter state
DOWN front panel down button
ENTER front panel enter button
FMT0 set signal format to composite**
FMT1 set signal format to s-video
FMT2 set signal format to component interlaced
FMT3 set signal format to component progressive
FMT4 set signal format to RGBHV
FMT5 set signal format to RGBS
FMT6 set signal format to RGsB
FMT7 set signal format to RGBGHVS passive
FMT8 set signal format to RGsB passive
Command Description
FMT? return signal format
FP toggle front panel controls
FP0 disable front panel controls
FP1 enable front panel controls**
FP? return front panel state
FRZ toggle freeze frame
FRZ0 disable freeze frame**
FRZ1 enable freeze frame
FRZ? return freeze state
GAM+ increase gamma
GAM- decrease gamma
GAM@ set gamma to normal**(010)
GAMxxx set gamma to absolute value (001-030)
GAM? return gamma
GRN+ increase green RGB gain
GRN- decrease green RGB gain
GRN@ set green RGB gain to normal** (128)
GRNxxx set green RGB gain to absolute value (0-255)
GRN? return green RGB gain
HTK0 set horizontal tracking to very fast
HTK1 set horizontal tracking to fast**
HTK2 set horizontal tracking to normal
HTK3 set horizontal tracking to slow
HTK? return horizontal tracking
HUE+ increase hue
HUE- decrease hue
HUE@ set hue to normal** (128)
HUExxx set hue to absolute value (000-255)
HUE? return hue
IM0 set input mode to auto detect**
IM1 set input mode to lockout changes
IM2 set input mode to user defined