HAI 100 4K
•
Setup Guide
The Extron HAI 100 4K is an audio embedder that embeds either two-channel analog audio, or two-channel or multi-channel
S/PDIF digital audio onto the HDMI output signal. The HAI 100 4K includes an HDMI input, analog stereo audio and S/PDIF audio
inputs, as well as an HDMI output.
Mounting
The HAI 100 4K can be placed on a desktop or tabletop using the included rubber feet, or mounted to a rack or furniture (see the
HAI 100 4K User Guide
, available at
www.extron.com
, for mounting options and instructions).
Cabling
Rear Panel Features and Cabling
CONFIG
HAI 100 4K
E
SIGNAL
HDCP
IN OUT
POWER
12V
0.4A MAX
OUTPUT
AUDIO INPUTS
INPUT
HAI 100 4K
L
R
S/PDIF
ANALOG
A
A
B
B
C
C
B
B
E
E
C
C
A
A
D
D
Figure 1.
HAI 100 4K Rear Panel
A
Power input
— Connect the provided power supply to the 3.5 mm, 2-pole captive
screw power receptacle (see the image at right).
ATTENTION:
•
Do not connect the power supply before reading the Attention in the
Power Supply section of the
HAI 100 4K User Guide
.
•
Ne branchez pas la source d’alimentation externes avant d’avoir lu
les mises en garde dans la section « Power Supply » du
HAI 100 4K
User Guide
.
B
HDMI input
— Connect an HDMI input source into this female HDMI type A
connector.
NOTE:
By default, the EDID stored at the HDMI input is set to 720p at 60 Hz with 2-channel audio. EDID can be
configured using Extron PCS software or SIS commands (see
Configuration
on the next page).
C
HDMI output
— Connect an HDMI output device into this female HDMI type A connector.
D
Analog audio input
— Connect an analog audio device to this 5-pole 3.5 mm captive screw connector (see figure 2). This
connector accepts 2-channel stereo balanced or unbalanced audio.
NOTE:
Analog audio is embedded automatically by default, replacing any existing embedded digital audio.
The
input audio format setting can be configured
using PCS or SIS commands (see
Configuration
on the next page).
Do not tin the wires!
Balanced Audio Input
Tip
Ring
Tip
Ring
Sleeves
Unbalanced Audio Input
Tip
No Ground Here
No Ground Here
Tip
Sleeves
LR
LR
Figure 2.
Analog Input Connector Wiring
ATTENTION:
•
Connect the sleeve to the ground (Gnd) terminal. Connecting the sleeve to a negative (-) terminal will damage the
audio output circuits.
•
Connectez le manchon à la terminaison terre (Gnd). Connecter le manchon à une terminaison négative (-)
endommagera les circuits de la sortie audio.
SECTION A–A
A
A
Power Supply
Output Cord
Captive Screw
Connector
Ridges
Smooth
3/16"
(5 mm) Max.
A
Power input
D
Analog audio input
B
HDMI input
E
S/PDIF audio input (see the next page)
C
HDMI output