Extron electronics FOXBOX Rx HDMI, Руководство пользователя

Страница: 30 / 51

Command and Response Table for Transmitter SIS Commands (continued)
FOXBOX Tx/Rx HDMI • Remote Control 22
Command Function
SIS Command
(Host to Unit)
Response
(Unit to Host)
Additional description
Switch
mode (continued)
Show native EDID value
E
NEDID
} X$]
Show the native resolution of the
display connected to the receiver.
Import EDID
E
I
0EDID
}X%
EdidI
]
Audio Input Selection
Set input audio format
E
I
X^
AFMT
}
AfmtI
X^]
Sets the input audio format.
View input audio format
E
IAFMT
} X^]
View the input audio format setting.
Audio input gain and attenuation
NOTES:
•
The set gain ( G ) and set attenuation ( g ) commands are case sensitive. The increment level, decrement level, and show level are not
case sensitive.
•
When the controlling PC is connected to the receiver, the PowerCage FOX can perform this command only if the receiver-Tx-to-
transmitter-Rx fiber cable is connected. The unit returns the
E14 error if the Rx fiber is not connected.
Set input audio gain to a +dB value
X&
G Aud
X*]
Set the input level to
X*
dB (gain).
Example:
2G
Aud+02.0
]
Set the input level to +2 dB (gain).
Set input audio attenuation to a -dB
value
X(
g Aud
X*]
Set the input level to
X*
dB
(attenuation).
Increment input level
+G
Aud
X*]
Increase the audio level by 1 dB.
Example:
+G
Aud+03.0
]
Increment the input level from +2 dB
to +3 dB.
Decrement input level
–G
Aud–01.0
]
Decrease the audio level from 0 dB to
–1 dB.
Show input level
G
X*]
Input reports as an HDCP authorized device
HDCP authorized device on
E
E1HDCP
}
HdcpE1
]
Set the transmitter as an HDCP
authorized device.
HDCP authorized device off
E
E0HDCP
}
HdcpE0
]
Set the transmitter as not an HDCP
authorized device.
View HDCP authorized device
status
E
EHDCP
} X1!]
Show HDCP authorized device status.
KEY
: X$
= Native resolution Resolution and rate in an easily-viewed format, such as “ 800x600@60Hz “
X%
= EDID record 128 or 256 bytes
X^
= Input Audio Format
0
= follow switch ( default )
2
= force analog audio
1
= force digital audio
3
= Auto (digital if present, else analog
X&
= Audio gain adjustment range
00
to
10
X*
= Audio level adjustment range
-18
to
+10
(in 1.0 dB steps)
X(
= Audio attenuation adjustment range
00
to
18
X1)
= Enable or disable status
0
= off (down) or disable
1
= on (up) or enable
X1!
= HDCP authorized device
0
= off
1
= on ( default )